HENRY® 595 Cove Base Adhesive
A high-performance, solvent-free white adhesive for installing rubber and vinyl cove base.
- Aggressive initial grab – prevents slip during installation
- No open time required
- Plasticizer migration-resistant
- Easy cleanup with water
Convenient sizes: 11oz, 30oz or 1gal containers and 4gal pails
HENRY 595 Cove Base Adhesive is a high-performance, solvent-free white adhesive used in the installation of rubber and vinyl cove base.Bonds To:
HENRY 595 Cove Base Adhesive bonds rubber and vinyl cove base to concrete, concrete block, gypsum drywall, plaster, wood, plywood, brick, plastic laminate, and abraded glazed and metal surfaces on all grade levels as recommended by the cove base manufacturer.Trowel Recommendations:
Vinyl, rubber, or carpet cove base
1/8” D x 1/8” W x 1/8” A
310-340 lin. ft./gal. – 2-1/2” cove base
220-240 lin. ft./gal. – 4” cove base
165-180 lin. ft./gal. – 6” cove base
The W.W. Henry Company warrants that HENRY 595 will not break down or lose its cohesive strength due to manufacturing or formulation defects for 10 years, subject to certain exclusions and limitations set forth in the warranty, if used for its stated purpose and applied in accordance with the stated instructions.
Carefully read and follow all cautions and warnings on the product label. Refer to the Material Safety Data Sheet for additional product information.
Tech Support: 800.232.4832
Click Below for Technical and Specification Documents:Tech & Installation Info (English)Tech & Installation Info (Espanol)Tech & Installation Info (Français)SDS US & Canada (English)MSDS USA (Espanol)MSDS Canada (Francais)Back to Product ListBack to Top