HENRY® 422 Premium
Vinyl-Backed Flooring Adhesive
A premium, installer-grade adhesive for the fast and permanent installation of solid vinyl tile and vinyl plank, luxury vinyl tile, vinyl stair treads, vinyl-backed carpet and carpet tile, and vinyl-backed resilient sheet flooring.
HENRY 422 Premium Vinyl-Backed Flooring Adhesive is used for fast and permanent installation of solid vinyl tile and vinyl plank, luxury vinyl tile, vinyl stair treads, vinyl-backed carpet and carpet tile, and vinyl-backed resilient sheet flooring. It can also be used for the installation of glass-encapsulated vinyl flooring in accordance with the flooring manufacturers recommendations.Bonds To:
HENRY 422 Premium Vinyl-Backed Flooring Adhesive bonds to suspended A.P.A.-approved wood, underlayment board, cementitious underlayment, and dry concrete that is above, on, or below grade where there is less than 3 lb./sq. ft./24 hours as determined by the calcium chloride moisture test (ASTM-F-1869). NOTE: Not recommended for installation over soft, resilient floor coverings.Trowel Recommendations
1/16” D x 1/16” W x 1/16” A
117-135 sq. ft./gal.
(13-15 sq. yd./gal.)
1/32” D x 1/16” W x 5/64” A
225-240 sq. ft./gal.
(25-27 sq. yd./gal.)Warranty:
W.W. Henry Company warrants that HENRY 422 will not break down or lose its cohesive strength due to manufacturing or formulation defect for 10 years from the date of installation, if used for its stated purpose and applied in accordance with the instructions, subject to certain exclusions and limitations set forth in the warranty.Warnings:
Carefully read and follow all cautions and warnings on the product label. Refer to the Material Safety Data Sheet for additional product information. Tech Support:
Click Below for Technical and Specification Documents:Tech Info & Installation (English)Tech Info & Installation (Español)Tech Info & Installation (Français)SDS US & Canada (English)MSDS Canada (Français)MSDS USA (Español)Back to Product ListBack to Top